 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Math Forum / Math Software / Scilab / July 2009Problem mask creation scicos
Hi, I don't find where is my mistake. I make this super block with scicos: http://img36.imageshack.us/img36/5721/pbmask.jpg I enter parameter: test. I make a mask. But now when i want to double click on it, nothing happens. Thank you very much for your help :) Bonjour, J'ai un problème sous scicos dont je ne trouve pas la source. J'ai effectué un block avec scicos de la forme suivante: http://img36.imageshack.us/img36/5721/pbmask.jpg J'ai rentré le paramètre "test". Cependant quand je crée un masque et que je double clique sur le block, rien ne se passe... Merci beaucoup pour votre aide :) Hello, Which version of scilab do you use ? Try this: click on the super bloc and then right click on it + click on mask->remove mask Now, double click on your super bloc. YC > Hello, > [quoted text clipped - 5 lines] > > YC I use scilab 5.1.1. Ok, when you remove mask, you can modify what is in the super block. But i try to automatise it with mask. Indeed, normally, when i double click on a masked super bloc, i can modify parameters (here "test"). J'utilise scilab 5.1.1. Ce que tu me propose est de supprimer le mask pour pouvoir réacceder au super block. Mais moi j'essaye de paramétrer le bloc pour que quand je clique dessus je n'ai que les paramètres à régler (ici "test"). Mais celà ne fonctionne pas dans mon cas. Thanks/Merci Hi Are you using the latest version of Scicos, Scicos 4.3? If not install ScicosLab 4.3 (available from www.scicos.org and www.scicoslab.org) and try again. There have been many problems with the masking operation that has been fixed in the version 4.3. If you still have the problem, please send your diagram ".cos" file to scicos@inria.fr and we will examine it. With regards. FD gEx a écrit : > Hi, > I don't find where is my mistake. [quoted text clipped - 13 lines] > que je double clique sur le block, rien ne se passe... > Merci beaucoup pour votre aide :) What is a mask and what is it used for? As long as I'm asking, what is "atomic"? Thanks Roy On Jul 3, 5:14 am, Francois Delebecque <Francois.Delebec...@inria.fr> wrote: > Hi > Are you using the latest version of Scicos, Scicos 4.3? If not install [quoted text clipped - 25 lines] > > que je double clique sur le block, rien ne se passe... > > Merci beaucoup pour votre aide :) Hi Atomic has been introduced in Scicos 4.3. It allows the conversion of a super block into a basic Scicos block through code generation. Masking only masks the Super Block so that it looks like a basic block but it is not. Masking operation finds automatically (even though major improvements have been introduced in version 4.3 there could still be minor problems in automatic detection of parameters) the parameters of the block. Note that for "Create Atomic" operation, the Super Block should have no parameters coming from the outside; it has to be self contained. This is tested by Scicos. FD Roy a écrit : > What is a mask and what is it used for? > [quoted text clipped - 31 lines] >>> que je double clique sur le block, rien ne se passe... >>> Merci beaucoup pour votre aide :) Thanks! Are these features going to be documented in the next release? (When is the next release planned?) - Roy On Jul 3, 10:27 am, Francois Delebecque <Francois.Delebec...@inria.fr> wrote: > Hi > Atomic has been introduced in Scicos 4.3. It allows the conversion of a [quoted text clipped - 45 lines] > >>> que je double clique sur le block, rien ne se passe... > >>> Merci beaucoup pour votre aide :) |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2010 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.