Math Forum / Math Software / MATLAB

N Naveen Chowdary At Dolphin Dale High School.
Dolphin Dale High School Leader Of 8th Class.
Batch : 2010
Naveen Is Leader , First Ranker Of Dolphin.

I am looking for a matlab program using Newmark's Method: Nonlinear Systems to determine velocity, deflection, forces, etc. from earthquake acceleration data.

i am looking for a Matlab program to use Newmark's Method: Nonlinear Systems to calculate velocity, deflection, forces, etc. from earthquake acceleration input data.

Hi i have implemented Zero order hold, pole zero match and others by c2d command but i am unable to implement forward and backward rectangular rule for transfer function
(10s+10)/(s+10)
Can any body write a code for me for any one of rectangular method.
c2d command does not support ...

http://www.bigextracash.com/aft/9b6cc578.html
also click here to see and enjoy
http://sitetalk.com/imranraza

Is there any way to disable the low-pass filter in PCI-6115 measurement card (or any) using the data acquisition toolbox?
Thx
Joonas

I have an axes object on my GUI. It is object axes6 (Segmentation), you can see it in the following link:
http://img835.imageshack.us/img835/3797/guix.jpg
First using is ok, but problem is when I am trying to load another image, I got an error:
??? Error using ==> axes

I have a equation that goes like this.....
d^2/dt^2[x] + f(t) x - gamma * d/dt [x] where f(t) is a function of t. I have
a numerical form of f(t), but no analytical form, so i want to pass this
whole vector into my function....but I am able to pass only a single value...

I have a signal with following chacteristics
dt=4.0*e^-10;
N=750;
max Amplitude(32764) min Amplitude(-32754)

Hi Commu,
i written a report in Matlab Editor which i want top publish with Matlab Publiser.
Can please somebody help me how to do a LineBreak in MatlabPublisher?
- "\\" does not work

DO U WANT A MOVIE  CHANCE CLICK HERE
http://www.123maza.com/single-server/business

Hi. I am trying to plot an image given in the paper "Investigations into an UWB Microwave Radar Systemfor Breast Cancer Detection". I have the time-domain data available. To plot the image,i have mapped on the cylindrical data into X-Y system and used the command pcolor to plot ...

Hi !
I'm trying to replicate a simulation made in a paper on building a fuzzy controler for an HVAC system using Simulink.
I was able to make all the required membership functions, and to create the appropriate rules. I have two input values, and one output value. I have ...

Hi, everyone
I intend to communicate two real-time windows target models, located on 2 PCs, through udp. When I try to setup the data acquisition device in the block parameters dialogue of Stream Input/Output block of Real-Time Windows Target toolbox, it aways prompts as below and ...

i am trying to do a programme that will execute 2 parts of looping.
part A: create a solution A each iteration whereby each iteration requires 30minutes.
part B: require to wait for the solution A and the simulation of part B only need around 15 seconds for all the iteration.
hence, ...